LR Creedmoor Vernier Tang Sight - Winchester spacing + Sharps, Rem RB and more.
LR Creedmoor Vernier Tang Sight - Winchester spacing + Sharps, Rem RB and more.

LR Creedmoor Vernier Tang Sight - Winchester spacing + Sharps, Rem RB and more.

165/f You are bidding on one long range vernier tang sight, NEW. 5" tall. Adjustable for windage and elevation, The eyepiece secures the sight in the desired (adjusted) position. Loosening (unscrewing) it frees up the elevation car that is raised or lowered with the vertical screw on the LH side. The elevation car contains a windage car that is slid left or right. When both windage and elevation are in the desired position, the eyepiece is tightened to secure it in the selected position. This is a great deal easier to do than to describe, as it takes only a few seconds to make changes and tighten to retain the adjusted position Interchangeable eyepiece disks (one disk included). Its base has one round hole and one elongated slot and it is reversible, with hole spacing approximately 1.5" to 2.25", so this sight will fit virtually any rifle. The vernier scale on the left frame is graduated as 0, 25, 50, 75, 1, 25, 50, 75, 2, 25 & 5, from bottom to top. It is sold without screws, since various rifles have different threaded holes (or none, and you drill/tap to your liking). This long range sight will fit the original Winchesters and reproductions such as the Uberti high wall without modification (it's what we use on ours), you only need to purchase the Marbles Winchester 1885 tang sight screw set Mfr Part: 995014.(available from Brownells & others for under $10). It has an angle from its vertical staff to the base that matches most vintage and reproduction rifles. In the event that you have a rifle with a tang that is different, it is relatively easy to adjust the angle with respect to the rifle's tang to match your rifle. The angle sets itself with a flat spring in a thin slot in the base, sharply bent in the middle, with the bend/crease engaging a notch in the staff. Remove the screw that fastens the staff to the base, and take the spring out of its slot. Remove a bit of metal at a time from one end of the spring (using a file or stone), then (with the short end set against the forward or aft end of the slot) the notch engages the crease at a different position, changing the tang-to-sight angle to make it perpendicular to the axis of the bore. It is then left only to add a drop of glue (or locktite, anything to anchor it) under the spring and reassemble & re-install the sight on the rifle. Again, this easier to do than to describe. From a smoke-free, pet-free, gluten-free and pumpkinspice-free environment. Please Read The Following Policies, Disclaimers, Information & Self- Promotion - We accept Pay Pal ONLY We ship to the continental USA ONLY; if you are a foreign bidder, you MUST have a US shipping address. - We have good reasons for these policies. However, being kindhearted, understanding folk, we occasionally accede to a request that we deviate from one or the other, But Only if you arrange with us for a waiver Prior to Bidding. ~ Please Note: We take great care to assure that all descriptions are accurate and complete to the absolute best of our knowledge (& ability), but they are not guaranteed so. - If you discover an error or omission, or if you have any pertinent information to share regarding this auction, please click on " Ask seller a question" (under Seller Information at the top right of this page) to contact us. Please Note Some More: Unless specified otherwise in the description, all items are sold AS- IS and all sales are final. Shipping: We use our in-elegant, un-patented, much-admired " Train Wreck" packing/protection system. Unless you arrange otherwise with us, we ship via USPS Priority Mail, USPS 1st Class Mail or UPS as we deem best. ~ Thank you for looking. Please check our other auctions Here

current price: 147.5 $

Auction

SaleClic specifics for: LR Creedmoor Vernier Tang Sight - Winchester spacing + Sharps, Rem RB and more. Seller: hsnwcom Reviews: 2210 Positive Feedback: 98.7% Location: Woodbridge, Virginia Ships to: US Item: 133233393804 Non-Domestic Product: No Modified Item: No Country/Region of Manufacture: Unknown Custom Bundle: No Type: Sights Brand: Unbranded UPC: Does not apply

Similar products to "LR Creedmoor Vernier Tang Sight - Winchester spacing + Sharps, Rem RB and more." on SaleClic